BBC micro:bit Inventor kit

BBC micro:bit Inventor kit

Sadrži BBC micro:bit :

•  1 x Kitronik Inventors Kit for the BBC micro:bit.
• • 1 x Mounting Plate.
  • 1 x Potentiometer – Vertical Type (finger adjust) 100K.
  • 1 x Finger Adjust Spindle.
  • 2 x Plastic Spacer 10mm.
  • 1 x Sticky Fixer for Battery Pack.
  • 1 x Small Prototype Breadboard.
  • 1 x Terminal Connector.
  • 4 x Push Switch.
  • 1 x Motor.
  • 1 x Transistor.
  • 2 x Red 5mm LED.
  • 2 x Orange 5mm LED.
  • 2 x Yellow 5mm LED.
  • 2 x Green 5mm LED.
  • 1 x RGB 5mm LED.
  • 1 x Fan Blade.
  • 5 x 2.2KΩ Resistor.
  • 5 x 10KΩ Resistor.
  • 5 x 47Ω Resistor.
  • 1 x Edge Connector Breakout Board for BBC micro:bit.
  • 10 x Male to Male Jumper Wires.
  • 10 x Male to Female Jumper Wires.
  • 1 x 470uF Electrolytic Capacitor.
  • 1 x Piezo Element Buzzer.
  • 4 x Pan Head M3 Machine Screw.
  • Depending on which booklet version your Inventors Kit shipped with, you will have one of the two following components;
    • 1 x Miniature LDR. For booklet Versions pre V1.7.
    • 1 x Phototransistor. For booklet versions post V1.7.
    • 1 x 1M Anti Tangle USB Cable.
    • 1 x Battery Cage.
    • 2 x AAA Batteries.

The Kitronik Inventor’s Kit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor’s Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors.

To get you off to a flying start, we have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don’t need any experience with programming as the tutorial book will guide you every step of the way. You’ll be programming and creating circuits in no time!

Dimensions:

• PCB Length: 52mm.
• PCB Width: 42mm.
• PCB Height: 11.7mm.

 Requires:

• Computer with Internet access.
• 1 x Phillips Screwdriver.
• 1 x Terminal Block Screwdriver.

BBC micro:bit Inventor kit zahteva sklapanje.